Small saddle-style tap used to cut into an existing duct line to begin or extend a QF system. Available in galvanized and stainless steel, sizes 3"-40".

Small saddle-style tap used to cut into an existing duct line to begin or extend a QF system. Available in galvanized and stainless steel, sizes 3"-40".

Saddle-style branch used to cut into an existing duct line to begin or extend a QF system, at 30° (45° optional). Available in galvanized and stainless steel, sizes 3"-40".

Saddle-style branch used to cut into an existing duct line to begin or extend a QF system, at 30° (45° optional). Available in galvanized and stainless steel, sizes 3"-40".

<p>Straight-through tee branch with a 90° side outlet. Both main-line ends must match diameter; the side outlet can be equal to or smaller than the main line. Available in galvanized...

<p>Straight-through tee branch with a 90° side outlet. Both main-line ends must match diameter; the side outlet can be equal to or smaller than the main line. Available in galvanized...

<p>Double-branch fitting for splitting a duct line into three ports (one main plus two branches) at 30° (45° optional). Available in galvanized and stainless steel, sizes 3"-40".</p>

<p>Double-branch fitting for splitting a duct line into three ports (one main plus two branches) at 30° (45° optional). Available in galvanized and stainless steel, sizes 3"-40".</p>

<p>Symmetrical Y-shaped branch for splitting a duct line into two equal legs at 60° (90° optional). Both branch legs must be at least 50% of the main diameter. Available in...

<p>Symmetrical Y-shaped branch for splitting a duct line into two equal legs at 60° (90° optional). Both branch legs must be at least 50% of the main diameter. Available in...

<p>Standard branch fitting for splitting or joining a duct line at 30° (45° optional). Length and reducer needs depend on the port diameters ordered. Available in galvanized and stainless steel,...

<p>Standard branch fitting for splitting or joining a duct line at 30° (45° optional). Length and reducer needs depend on the port diameters ordered. Available in galvanized and stainless steel,...

End cap closes off a QF tap for future use. Optional birdscreen version adds a wire mesh guard. Available in galvanized and stainless steel, sizes 3"-24".

End cap closes off a QF tap for future use. Optional birdscreen version adds a wire mesh guard. Available in galvanized and stainless steel, sizes 3"-24".

Adapts a QF end to connect with rubber hose. Not compatible with metal flex hose. Available in galvanized and stainless steel, sizes 3"-24".

Adapts a QF end to connect with rubber hose. Not compatible with metal flex hose. Available in galvanized and stainless steel, sizes 3"-24".

dapts a QF end down to a raw ID/OD end for connecting directly to machine ports, with the option to expand up to 0.3" over nominal size. Available in galvanized...

dapts a QF end down to a raw ID/OD end for connecting directly to machine ports, with the option to expand up to 0.3" over nominal size. Available in galvanized...

Adapts duct with QF ends to duct with flanged ends. Angle flange is rotational for easier installation; flat flange available with custom hole pattern. Available in galvanized and stainless steel,...

Adapts duct with QF ends to duct with flanged ends. Angle flange is rotational for easier installation; flat flange available with custom hole pattern. Available in galvanized and stainless steel,...

Allows up to 22° of off-center movement, ideal for machines with moving dust ports. Air flow directional. Galvanized only, sizes 4"-14".

Allows up to 22° of off-center movement, ideal for machines with moving dust ports. Air flow directional. Galvanized only, sizes 4"-14".

Wall or roof flashing provides a clean, protected transition where QF ducting passes through a wall or ceiling. Ordering one flashing includes both an inside and outside piece. Available in...

Wall or roof flashing provides a clean, protected transition where QF ducting passes through a wall or ceiling. Ordering one flashing includes both an inside and outside piece. Available in...

Wide-cap weather cap protects roof-mounted stacks from precipitation while a wire screen and inner cone reduce backpressure and keep out wildlife and debris. Available in galvanized and stainless steel, sizes...

Wide-cap weather cap protects roof-mounted stacks from precipitation while a wire screen and inner cone reduce backpressure and keep out wildlife and debris. Available in galvanized and stainless steel, sizes...

Locking quadrant handle valve for regulating air volumes in clean air applications only. Available in galvanized and stainless steel, sizes 3"-24".

Locking quadrant handle valve for regulating air volumes in clean air applications only. Available in galvanized and stainless steel, sizes 3"-24".

Eliminates back pressure on the fan while providing weather protection for exhaust stacks routed through the roof. Flange included for guide wire attachment; airflow directional. Available in galvanized and stainless...

Eliminates back pressure on the fan while providing weather protection for exhaust stacks routed through the roof. Flange included for guide wire attachment; airflow directional. Available in galvanized and stainless...